Connecting The Battery - Toro Groundsmaster 5900 Installation Instructions Manual

9
Installing the Decal
Parts needed for this procedure:
1 Fuse decal (Part No. 139-1031)
Procedure
1. Remove any dust and debris from the existing
fuse-decal surface; refer to
decal location.
Figure 19
1. Contactor
2. Install the fuse decal (Part No. 139-1031) over
the existing fuse decal
10

Connecting the Battery

No Parts Required
Procedure
Rotate the battery disconnect switch to the O
position; refer to the Operator's Manual for your
machine.
Figure 19 for the
g282717
2. Decal location
(Figure 19).
N
11
Installing the Side Panels
and Closing the Hood
No Parts Required
Procedure
1. Align the holes in side panels with the holes
in the panel supports of the machine; refer to
Figure 2 in 3 Removing the Side Panels (page
2).
2. Secure the side panels to the machine with the
2 knobs that you removed in
Side Panels (page
3. Close the hood and secure it.
9
3 Removing the
2).