LG CordZero A9 Owner's Manual page 35

4
Attach the crevice tool to the product body
and use the vacuum to remove foreign objects
and dust from the brush and the bottom of the
nozzle.
5
Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
brush and the bottom of the nozzle.
• Do not rinse or submerge the rotating brush
or nozzle in water.
6
Slide the brush back into the nozzle and rotate
the cover back into place. Turn the cover lock
clockwise to lock the cover.
WARNING
• Never wash the rotating brush and the nozzle
with water. Water could reach the motor and
cause electric shock or fire.
• Do not use the rotating brush and the nozzle to
suck up oils or any liquids, including water.
CAUTION
• Keep fingers away from pinch points when
assembling the appliance or the charging
station.
• Do not use the rotating brush as a wet mop.
Cleaning the Power Drive slim
Floor Nozzle
1
Press the nozzle release button to remove
the nozzle from the extension pipe or product
body.
2
Turn the nozzle upside down and remove the
rotating brush while holding down the PUSH
button on the nozzle.
3
Attach the crevice tool to the product body and
use the vacuum to remove foreign objects and
dust from the brush and the bottom of the
nozzle.
4
Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
brush and the bottom of the nozzle. Remove
foreign objects, debris and hair from all Rollers
of the nozzles using tweezers.
EN
35