Changing Fax Forwarding Number - Brother FAX1 570MC Owner's Manual

Changing Fax Forwarding Number

You can change the default setting of your fax forwarding number from a remote
fax machine.
1
Dial your FAX/MFC number.
2
When you hear the beep, immediately enter your Remote Access Code
(The factory setting is
3
When you hear two short beeps, use the dial pad to press
4
Enter the new number of the remote fax machine where you want your fax
messages forwarded, and then press
You cannot use
pause, press .
To retrieve the Memory Status List, when you hear two short beeps, use the
5
dial pad to press 9
6
Use the dial pad to enter the number of the remote fax machine (up to 20
digits), and then press
7
After you hear your FAX/MFC beep, hang up and wait.
Your FAX/MFC calls the remote fax machine. The remote fax machine prints
the Memory Status List showing the new forwarding number.
8 Check the forwarding number.
If the forwarding number is incorrect, return to Step 1 to reset it.
M E S S A G E C E N T E R
1 5 9 ).
.
and as dial numbers. However, if you want to store a
6 1 .
.
71
9 5 4 .