Dell EU2SPE Disassembly Instructions Manual page 12

WEEE Disassembly Instructions
EU2SPE WEEE Disassembly Instructions
12
4. Grasp the storage processor and firmly pull it from the chassis.
5. If the storage processor is being replaced, then the DIMMs must be moved from
the current storage processor to the replacement storage processor as follows:
a. Remove the air duct from the current storage processor and the
replacement storage processor.
b. Remove the DIMMs one at a time from the current storage processor and
install them in the same location on the replacement storage processor.
c. When the last DIMM has been moved, replace the air duct in the
replacement storage processor.