Advertisement
Remove a 3.5" disk drive
Remove the 2.5" disk drive
Procedure
1. Attach an ESD wristband to your wrist and the enclosure.
2. Slide the disk's latch button the right to release the latch.
3. Rotate the latch outward (1) and slowly pull the disk from its slot (2). Place the
disk on a padded, static-free surface.
Figure 1 Removing a 3.5" disk drive
1
This procedure describes how to remove the 2.5 disk drive
Procedure
1. From the rear of the device, press the release button down on the 2.5" disk
drive cover to free it from the chassis.
WEEE Disassembly Instructions
2
Disassembly instructions
9
Advertisement
