Brother 1030e User Manual page 55

4
Press Fax Start.
If you wish to send a fax, insert a document into the
ADF. Then press Fax Start.
To cancel the Call Reply (for example, when you selected the Wrong Caller ID), simply press
Stop/Exit and begin again; the Caller ID will not be lost.
To Activate Certain Network Services When Using Call Reply
I You may wish (in order to activate certain network services), to insert a special
prefix to be dialled in front of the Caller ID number when using the Call Reply
feature. For example,
I Your outgoing Caller ID withheld
The required prefix, typically three to six digits (including # and
inserted after displaying the desired Caller ID in step 3 on the previous page. (You can enter the
prefix up to 20 digits on the machine.) The complete number string including the prefix will then be
dialled by pressing Fax Start.
Select the desired Caller ID, wait 2 seconds until you see the
date and time the caller ID was received.
Enter the prefix by using number keys up to 20 digits.
- The display will be cleared when you press any of the number keys.
- To cancel the prefix (such as when you entered the wrong number), simply press Stop/Exit.
The display will return to the desired Caller ID you selected.
- If you press Stop/Exit again, the machine will return to the current date and time display. You
are no longer in the call reply mode.
- Any problems or queries in using network services should be raised in the first instance with
your network operator(s).
- With Call Reply, automatic redial does not function in cases where the called party is busy or
doesn't answer.
Call Reply to DDI numbers via Caller ID
Calls derived from a caller ID number to destinations connected to a "Direct Dial Inward (DDI)"
private exchange system may fail to connect, or may be answered in the first instance by the called
premises' main switchboard rather than by the intended extension. Brother is not liable for any call
charges thus incurred.
Clearing the Caller ID Stored in Memory (Only for FAX-1030e)
For the effective use of the memory, it is recommended that you should clear the Caller ID stored
into memory by pressing Erase when the screen displays the number.
Printing Caller ID List
1
Press Menu/Set, 0, 2.
2
to select PRINT REPORT, and press Menu/Set.
Press or
3
Press Stop/Exit.
DIALING
TELEPHONE
symbols) in length, may be
25)09/11 15:25
DIAL:PRESS START
Advanced Receiving
49