Out-Of-Unit Patient Beds; Viewing An Out-Of-Unit Patient Bed; Removing Viewed Out-Of-Unit Patient Beds; Configuring The Real-Time Trend Window - GE ApexPro Operator's Manual

Viewing real-time patient data

Out-of-unit patient beds

Viewing an out-of-unit patient bed

Removing viewed out-of-unit patient beds

Configuring the real-time trend window

7-6
1. Go to the CIC Pro center in your care unit that has room to view additional
admitted patient beds.
2. From the multi-patient viewer, right click in an empty patient window displaying
an Admit button. The right click menu displays.
3. From the right click menu, choose Select Care Unit then Bed Number. A list of
networked care units displays.
4. From the list, choose the care unit and bed name you want to view. The patient
bed is displayed in the multi-patient viewer.
You can view out-of unit patient beds that are not displayed at your CIC Pro center.
The bed you wish to view must be on the Unity Network.
NOTE
You cannot change the Alarm Control or parameter control settings of an out-of-
unit patient.
Complete the following procedure to view networked out-of-unit patient beds:
1. From the multi-patient viewer, click View Other. A list of networked care units,
floors, or hospitals displays.
2. Click the + sign next to the desired unit, floor, or hospital to display the list of
viewable beds.
3. Select the bed you want to view and click OK. The single patient viewer displays
for this patient.
4. To close the single patient viewer, click the
side of the window.
Complete the following steps to remove out-of-unit patient beds you are viewing
from the multi-patient viewer:
1. From the multi-patient viewer, right click on the patient bed you want to remove.
2. From the right click menu, choose Select Care Unit then Bed Number > None.
You can configure the display of a real-time trend window in the multi-patient viewer.
The real-time trend window displays the recent patient trends for a maximum of two
parameters.
ApexPro™
(close button) on the top right
2001989-200E