Monitored Parameters; Adjusting Parameter Control Settings; Ecg; Ecg Control Settings - GE ApexPro Operator's Manual

Monitored parameters

Adjusting parameter control settings

ECG

ECG control settings

2001989-200E
The CIC Pro center can display data for many monitoring parameters.
NOTE
For a complete list of supported parameters, refer to the CIC Pro Clinical
Information Center Operator's Manual.
The following guidelines apply to adjusting parameter control settings at the CIC Pro
center:
You may view and adjust parameter settings for any in-unit patient. Any changes
are temporary and return to the default settings when a patient is discharged.
These changes are also adopted by the monitor.
You may not be able to adjust some of the control settings for non-GE acquisition
devices that are interfaced via the Unity Network Interface Device.
You may view parameter settings for any out-of-unit patient. However, you
cannot adjust these settings.
To permanently change the parameter default settings, refer to the appropriate
CIC Pro center service manual.
NOTE
The Dinamap PRO monitors' alarm limits are not configurable at the CIC Pro
center, but they can be silenced at the CIC Pro center. However, alarms that are
silenced at the CIC Pro center will not be silenced at the monitor. Refer to the
Dinamap Pro 100–400 Operation Manual for detailed information.
This section briefly covers adjusting control settings for the following parameters:
ECG
SpO
2
Non-invasive pressures
Invasive pressures
Complete the following procedure to adjust the control settings.
1. From the multi-patient viewer, click on the patient you want to view. The single
patient viewer displays.
2. From the single patient viewer, click Monitor Setup.
3. Click ECG to display the control window.
ApexPro™
Viewing real-time patient data
7-11