Table of Contents
Advertisement
User Menu Options
6.2
Isolating a Zone or Fault
6.3
Set Date/Time
18
Siemens Building Technologies
Fire Safety & Security Products
Zones or faults on the system can be manually
isolated from the Keypad. Isolation allows a zone
to be removed from the system, silently
disregarded, until it is set for de-isolation by the
user.
To isolate a zone:
1.
Scroll to the ISOLATE option and press
SELECT (right soft key).
2.
Scroll to the ZONES option and press
SELECT (right soft key).
3.
A list of zones on the system displays. Select
the required zone and toggle the setting from
NOT ISOLATED to ISOLATED using the
up/down arrow keys.
4.
Press SELECT (right soft key) to exit User
Programming.
The date and time can be manually entered on the system. The time and date
information displays on the Keypad to be used with time-related programming
features.
To program the Date and Time:
1.
Scroll to the SET DATE/TIME option and
press SELECT (right soft key). The date
displays on the top line.
2.
To enter a new date, press the required
numeric keys. To move the cursor to the left
and right, press the left and right arrow keys.
Press ENTER (right soft key) to save the
new date.
3.
To enter a new time, press the required
numeric keys. To move the cursor to the left
and right, press the left and right arrow keys. Press ENTER (right soft key) to
save the new time.
...ISOLATE...
EXIT
SELECT
... ZONES...
BACK
SELECT
... ZONE1...
BACK
SELECT
...ISOLATED...
BACK
SELECT
...SET DATE/TIME...
EXIT
SELECT
DATE
08/07/2008
BACK
ENTER
UPDATED
09.2008
Advertisement
Table of Contents
