4
Using the Keypad Interface
Siemens Building Technologies
Fire Safety & Security Products
Fig. 2
Basic Keypad Programming Interface
1.
Top Line of Display
In the normal state, this line displays the current date and time.
In Programming Mode, this line displays one of the following:
The programming feature to be selected
–
The current setting of the selected feature
–
During an alert condition, this line displays the nature of the current alert.
2.
Bottom Line of Display
In the normal state, this line is blank.
In Programming Mode, this line displays options available to the
user/Engineer. These options are aligned over the left and right soft keys for
selection as required.
3.
Left Soft Key
This key is used to select the option presented on the left side of the bottom
line of the display. Possible values are:
EXIT to exit programming
–
BACK to return to previous menu
–
4.
Right Soft Key
This key is used to select the option presented on the right side of the bottom
line of the display. Possible values are:
SELECT to select the option displayed on the top line
–
ENTER to enter the data displayed on the top line
–
SAVE to save a setting
–
5.
Multi-Function Navigation Key (Navi-Key)
Using the Keypad Interface
09.2008
9