Engine Maintenance; Servicing The Air Cleaner - Toro ProCore Processor Operator's Manual

Figure 42
2. Wipe grease fittings clean so that foreign matter cannot
be forced into the bearing or bushing.
3. Pump grease into the bearing or bushing.
4. Wipe up excess grease.

Engine Maintenance

Servicing the Air Cleaner

Note: Service the air cleaner filter only when the service
indicator (Figure 43) requires it. Changing the air filter before
it is necessary only increases the chance of dirt entering the
engine when you remove the filter.
1. Air-cleaner indicator
1. Check the air-cleaner housing for damage which could
cause an air leak.
2. Replace air-cleaner housing if it is damaged.
3. Check the entire intake system for leaks, damage, or
loose hose clamps.
Removing the Air Filters
1. Turn the key in the ignition switch to the O
remove the key, and wait for all moving parts to stop
before leaving the operating position.
2. Pull the latch outward and rotate the air-cleaner cover
counterclockwise
3. Remove the air-cleaner cover from the air cleaner
housing (Figure
35
Figure 43
(Figure 44).
44).
g018320
position,
FF