Optional) Setting Parameters Before Using Neteco - Huawei ETP48400-C9A2 User Manual

ETP48400-C9A2 Embedded Power
User Manual
Main Menu
----End
Login Page
Enter https://local IP address for the SMU (for example, https://192.168.0.10) in the address
box of Internet Explorer and press Enter. The login page is displayed, as shown in
Figure 6-9 Login page

6.7.2 (Optional) Setting Parameters Before Using NetEco

Networking Mode 1: FE Port
Step 1 Apply to the site or equipment room network administrator for a fixed IP address.
Step 2 Set the IP address, subnet mask, and gateway on the SMU's LCD.
Table 6-6 IP parameters
Main Second-Level
Menu Menu
Setting Network
Issue 05 (2020-04-07)
Second-Level
Menu
The preset user name is admin, and the preset password is Changeme.
Third-Level
Menu
IP Address
Copyright © Huawei Technologies Co., Ltd.
Third-Level
Menu
Default Value
192.168.0.10
Default Value
Settings
Set this parameter according to
the IP address assigned by the
6 Commissioning
Settings
according to the
gateway address
provided by the
network
administrator.
Figure 6-9.
52