Functions, Codes And Symbols - ABB Relion 615 Series Manual

1MRS756881 B
1.4.3
RET615
Point List Manual
The corresponding parameter values are "On" and "Off".
• IED input/output messages and monitored data names are shown in Courier
font, for example:
When the function starts, the START output is set to TRUE.

Functions, codes and symbols

Table 1: RET615 Functions, codes and symbols
Function
Protection
Three-phase non-directional
overcurrent protection, low stage,
instance 1
Three-phase non-directional
overcurrent protection, low stage,
instance 2
Three-phase non-directional
overcurrent protection, high
stage, instance 1
Three-phase non-directional
overcurrent protection, high
stage, instance 2
Three-phase non-directional
overcurrent protection,
instantaneous stage, instance 1
Three-phase non-directional
overcurrent protection,
instantaneous stage, instance 2
Non-directional earth-fault
protection, low stage, instance 1
Non-directional earth-fault
protection, low stage, instance 2
Non-directional earth-fault
protection, high stage, instance 1
Non-directional earth-fault
protection, high stage, instance 2
Negative-sequence overcurrent
protection, instance 1
Negative-sequence overcurrent
protection, instance 2
Residual overvoltage protection,
instance 1
Residual overvoltage protection,
instance 2
Three-phase undervoltage
protection, instance 1
Three-phase undervoltage
protection, instance 2
Table continues on next page
IEC 61850 IEC 60617
PHLPTOC1 3I> (1)
PHLPTOC2 3I> (2)
PHHPTOC1 3I>> (1)
PHHPTOC2 3I>> (2)
PHIPTOC1 3I>>> (1)
PHIPTOC2 3I>>> (2)
EFLPTOC1 Io> (1)
EFLPTOC2 Io> (2)
EFHPTOC1 Io>> (1)
EFHPTOC2 Io>> (2)
NSPTOC1 I2> (1)
NSPTOC2 I2> (2)
ROVPTOV1 Uo> (1)
ROVPTOV2 Uo> (2)
PHPTUV1 3U< (1)
PHPTUV2 3U< (2)
Section 1
Introduction
IEC-ANSI
51P-1 (1)
51P-1 (2)
51P-2 (1)
51P-2 (2)
50P/51P (1)
50P/51P (2)
51N-1 (1)
51N-1 (2)
51N-2 (1)
51N-2 (2)
46 (1)
46 (2)
59G (1)
59G (2)
27 (1)
27 (2)
7