Related Manuals for LG LW2100AP
Summary of Contents for LG LW2100AP
- Page 1 LW2100AP User’s Manual Version 1.4 2002.05.14 ’ ’ Copyright© 2002 LG Electronics Inc., LTD. Page 1 of 46...
-
Page 2: Table Of Contents
2.2.12. Upgrade Menu ........................38 2.2.13. Default Value Menu ........................ 39 Chapter 3 Console Window Manual .................. 40 3.1. Connecting Console Window ................. 40 3.2. Setting Configuration Elements ..............43 Copyright© 2002 LG Electronics Inc., LTD. Page 2 of 46... - Page 3 LW2100AP User’s Manual Version 1.4 2002.05.14 All the contents described in the document may not be used without written permission of LG Electronics Inc., Ltd. This user manual may be changed without notification as function and specification of LW2100AP have changed, and the changed contents can be free downloaded when you visit LG Electronics homepage (http://www.lgnetwork.com/)
-
Page 4: Chapter 1 Overview Of The System
Integrated DHCP services allow up to 63 users to get their IP address automatically on boot up from the LW2100AP. The LW2100AP can be set to allow separate FTP, Web, and Multiplayer game servers to share the same Internet-visible IP address while still protecting the servers and local users from hackers. -
Page 5: Appearance
The LED is blinking while the system receives packets via this port. AIR1/AIR2 : The LED turns on while the default/optional wireless connection is active.. The LED is blinking while the system receives packets via this air link. Copyright© 2002 LG Electronics Inc., LTD. Page 6 of 46... - Page 6 10/100Mbps Ethernet to an external Cable/DSL Modem or LAN Switch/Hub LAN2 : Local Port, RJ-45, 10Mbps Ethernet Console : connection to PC COM port. DC5V : connect the power adapter. Antenna1 : Dipole Antenna Antenna2(Optional) : Dipole Antenna Copyright© 2002 LG Electronics Inc., LTD. Page 7 of 46...
-
Page 7: Components
Version 1.4 2002.05.14 1.1.3. Components Item Included in Description Purpose Standard package Console cable Connects from console port of LW2100AP to RS232C Port on PC Power adapter Connects from LW2100AP to power source LW2100AP Main Unit Antenna Manuals User’s Guide Copyright©... -
Page 8: Hardware Installation
3. Use a UTP Ethernet Straight-though Cable to connect the LAN2(Local) port to a free port on your hub or switch OR Use a Cross-Over cable to connect directly to a PC. 4. Connect the Power Adapter to the DC 5V port on the LW2100AP and into a wall outlet. Copyright© 2002 LG Electronics Inc., LTD. - Page 9 Using the Console cable included in the package, connect a Serial port of the administrator computer to the Console port of LW2100AP. One end of the console cable with the RJ45 connector is connected to the console port on the back panel of the system and the other end is connected to the 9-pin serial port of a RS-232 based terminal such as workstation, PC or notebook as shown in the following figure.
-
Page 10: Network Setting For Pc
Client machines(PC) require no software, simply set them to accept a dynamically assigned IP address and reboot. Each time they are powered up the LW2100AP will recognize them and set their IP address to instantly connect them to the LAN. - Page 11 Click the “More Info” button in the “IP Configuration” window as above to view information on IP Configuration of LGE Wireless LAN Card. Below is the window displayed when you click the “More Info” button. Copyright© 2002 LG Electronics Inc., LTD. Page 12 of 46...
- Page 12 Address, click the “Release All” button followed by “Renew All”. The existing IP address can be re-assigned. In case the existing IP address is already assigned to another user, you may be re-assigned a different user’s IP address Copyright© 2002 LG Electronics Inc., LTD. Page 13 of 46...
-
Page 13: Chapter 2 Web Server Manual
Chapter 2 WEB Server Manual 2.1 Execution of WEB Server and AP connection to WEB Server This chapter explains how to connect the LW2100AP to the Internet using Web-based management tool. The first step is to execute the Internet browser directly and to enter the IP address of an AP to connect. - Page 14 LW2100AP User’s Manual Version 1.4 2002.05.14 Navigation buttons appear at the left of the page. You use the navigation buttons to display other management pages Copyright© 2002 LG Electronics Inc., LTD. Page 15 of 46...
-
Page 15: Menu Description Of Web Server
Password : Used to change the password of connected AP. Enter a password to change in “Password” and Retype in “Password Confirm”. The password for Password and Retype shall be identical. If the password is wrong or not correct, an error message Copyright© 2002 LG Electronics Inc., LTD. Page 16 of 46... - Page 16 WAN(LAN1) Default Gateway: Describes the default gateway of AP. It is setup as 10.0.0.254 in factory shipment. Upon changing, user shall inquire of the related person about the matters. Copyright© 2002 LG Electronics Inc., LTD. Page 17 of 46...
- Page 17 It is setup as 10.0.0.102 in factory shipment. Upon changing, user shall inquire of the related person about the matters. LAN(10M) parameters MAC Address : This MAC(Media Access Control) address is a unique serial number Copyright© 2002 LG Electronics Inc., LTD. Page 18 of 46...
- Page 18 However, if the “SAVE” is not performed, the changed value will be returned to the previous value when AP is rebooted. Refer to the “SAVE” menu. Cancel : Used to cancel the changed item value of Basic Menu. Copyright© 2002 LG Electronics Inc., LTD. Page 19 of 46...
-
Page 19: 802.11B Menu
Passphrase. In case of Manual, it is to enter directly the web key for generation. In case of Passphrase, when a word is entered in accordance with the pre-defined method with the radio LAN, the web key corresponding to the related word will be automatically Copyright© 2002 LG Electronics Inc., LTD. Page 20 of 46... - Page 20 The rates are expressed in megabits per second. Beacon Interval : The amount of time between beacons in kilomicroseconds. One Kusec equals 1,024 micro seconds. Copyright© 2002 LG Electronics Inc., LTD. Page 21 of 46...
- Page 21 However, if the “SAVE” is not performed, the changed value will be returned to the previous value when AP is rebooted. Refer to the “SAVE” menu. Cancel: Used to cancel the changed item value of 802.11b Menu. Copyright© 2002 LG Electronics Inc., LTD. Page 22 of 46...
-
Page 22: Radius Server Menu
Authentication Type : Selects the authentication type as MAC, 802.1x, MAC + 802.1x Primary Authentication Server IP : Shows the IP address of primary RADIUS Server. Secondary Authentication Server IP : Shows the IP address of secondary RADIUS Server. Copyright© 2002 LG Electronics Inc., LTD. Page 23 of 46... - Page 23 However, if the “SAVE” is not performed, the changed value will be returned to the previous value when AP is rebooted. Refer to the “SAVE” menu. Cancel: Used to cancel the changed item value of RADIUS Menu. Copyright© 2002 LG Electronics Inc., LTD. Page 24 of 46...
-
Page 24: Dhcp/Nat Server Menu
DHCP Lease Start: Shows the start IP address out of the IP address range to be allocated to the clients when the DHCP Server is in use. DHCP Lease End: Shows the end IP address out of the IP address range to be Copyright© 2002 LG Electronics Inc., LTD. Page 25 of 46... - Page 25 However, if the “SAVE” is not performed, the changed value will be returned previous value when the AP is rebooted. Refer the “SAVE” menu. Cancel: Used to cancel the changed item value of DHCP/NAT Menu. Copyright© 2002 LG Electronics Inc., LTD. Page 26 of 46...
-
Page 26: Snmp Server Menu
NMS requesting SNMP command are same, the result of the requested MIB is returned. Write Community : When the command of set request is used through SNMP, it is used Copyright© 2002 LG Electronics Inc., LTD. Page 27 of 46... - Page 27 However, if the “SAVE” is not performed, the changed value will be returned to previous value again when the AP is rebooted. Refer to the “SAVE” menu. Cancel : Used to cancel the changed item value of SNMP Menu. Copyright© 2002 LG Electronics Inc., LTD. Page 28 of 46...
-
Page 28: Dmz Server Menu
However, if the “SAVE” is not performed, the changed value will be returned to previous value when the AP is rebooted. Refer to the “SAVE” menu. Cancel : Used to cancel the changed item value of DMZ Menu. Copyright© 2002 LG Electronics Inc., LTD. Page 29 of 46... -
Page 29: Mac Filter Menu
MAC Filter : : It is a MAC Filter function to setup the MAC address entering into each MAC address. Select “Enabled” to setup related function,and select “Disabled” to release the related function. Copyright© 2002 LG Electronics Inc., LTD. Page 30 of 46... - Page 30 However, if the “SAVE” is not performed, the changed value will be returned previous value when the AP is rebooted. Refer to the “SAVE” menu. Cancel: Used to cancel the changed item value of MAC Filter Menu. Copyright© 2002 LG Electronics Inc., LTD. Page 31 of 46...
-
Page 31: Ip Filter Menu
Apply : Used to change the item value of IP Filter Menu. Change the value of each item in input column and click related button, and then the configuration value will be changed. However, if the “SAVE” is not performed, the changed value will be returned Copyright© 2002 LG Electronics Inc., LTD. Page 32 of 46... - Page 32 LW2100AP User’s Manual Version 1.4 2002.05.14 previous value when the AP is rebooted. Refer the “SAVE” menu. Cancel : Used to cancel the changed item value of IP Filter Menu. Copyright© 2002 LG Electronics Inc., LTD. Page 33 of 46...
-
Page 33: Advanced Menu
Modify : Used to change the item value of Advanced Menu. Change the value of each item in input column and click related button, and then the configuration value will be changed. However, if the “SAVE” is not performed, the changed value will be returned Copyright© 2002 LG Electronics Inc., LTD. Page 34 of 46... - Page 34 LW2100AP User’s Manual Version 1.4 2002.05.14 previous value when the AP is rebooted. Refer the “SAVE” menu. Cancel : Used to cancel the changed item value of Advanced Menu. Copyright© 2002 LG Electronics Inc., LTD. Page 35 of 46...
-
Page 35: Save Menu
2.2.10. Save Menu Used to save the changed configurations. However, if the “SAVE” is not performed, the changed configuration value will be returned previous value when the AP is rebooted. Copyright© 2002 LG Electronics Inc., LTD. Page 36 of 46... -
Page 36: Reboot Menu
2.2.11. Reboot Menu Used to reset connected AP. Click Reboot button. System will be rebooted, and not saved configuration will be deleted. AP has to be reconnected for web managing. Copyright© 2002 LG Electronics Inc., LTD. Page 37 of 46... -
Page 37: Upgrade Menu
AP’s system firmware can upgrade by user’s local disk in this page together. After firmware upgrade in this page, AP will be rebooted to apply new firmware. Before AP’s firmware upgrade, check console menu to confirm current AP’ firmware version. Copyright© 2002 LG Electronics Inc., LTD. Page 38 of 46... -
Page 38: Default Value Menu
2.2.13. Default Value Menu Used to make the status of connected AP into factory shipment status. Click the Default button. After defaulting the AP, change the WAN IP Address for reconnecting to AP. Copyright© 2002 LG Electronics Inc., LTD. Page 39 of 46... -
Page 39: Chapter 3 Console Window Manual
HyperTerminal program, you are allowed to access AP by different types of terminal programs. The initial window is executed as below. Use a random name to access AP and click the “OK”. Then, the “Connect To” window appears: Copyright© 2002 LG Electronics Inc., LTD. Page 40 of 46... - Page 40 Select the number to be used to access AP from the serial ports list in the above window. Then click the “OK” button. A window appears to set various parameters to be used for serial communications. Copyright© 2002 LG Electronics Inc., LTD. Page 41 of 46...
- Page 41 +-----------------------------------------------------------------------------------------------+ Select > If the password is correctly entered, a prompt provided by AP firmware appears as shown in the window below. The default value of the password is “lw2100ap”. Copyright© 2002 LG Electronics Inc., LTD. Page 42 of 46...
-
Page 42: Setting Configuration Elements
L(Load)/S(Save)/R(Reboot)/D(Default)/C(Command shell) +--------------------------------------------------------------------------------------------------+ Select Configuration Menu Number / Select Command +--------------------------------------------------------------------------------------------------+ Select >c ******************************* NOTICE ***************************************** If you want to setup AP configuration, Type "setup" at command shell ********************************************************************************* [lgap]# Copyright© 2002 LG Electronics Inc., LTD. Page 43 of 46... - Page 43 Press E(Edit) Key for editing / Press Return Key for Upper Menu +-----------------------------------------------------------------------------------------------+ Select >c ******************************* NOTICE ******************************* If you want to setup AP configuration, Type "setup" at command shell ********************************************************************** [lgap]# Enter “setup” and then press “Enter” key Copyright© 2002 LG Electronics Inc., LTD. Page 44 of 46...
- Page 44 S. Set Configuration 9. IP Filter Q. exit 0. Advanced +---------------------------------------------------------------+ Select Configuration Menu... +---------------------------------------------------------------+ COMMAND Select >> L(Load)/S(Save)/R(Reboot)/D(Default)/C(Command shell) +-----------------------------------------------------------------------------------------------+ Select Configuration Menu Number / Select Command +-----------------------------------------------------------------------------------------------+ Select >> Copyright© 2002 LG Electronics Inc., LTD. Page 45 of 46...
- Page 45 Caution Be careful to define the value(s) and item(s) that you want to change as long as any change in AP configuration may seriously affect terminal system connected to AP. Copyright© 2002 LG Electronics Inc., LTD. Page 46 of 46...