LG LW2100AP User Manual page 41

To interface with AP, set bit rate per second to "57600", data bit to "8", parity to "NO", stop bit to
"1", flow control to "NO" and click the "OK" button. Then the initial HyperTerminal window
shows. Press the "Enter" key in the initial window. If you successfully access AP, a window
indicating to input the password of connected AP is opened.
LG Access Point
login: root
Password:
+-----------------------------------------------------------------------------------------------+
|
+-----------------------------------------------------------------------------------------------+
| MENU
|
| 1. EZsetup
| 2. Basic[SYSTEM]
| 3. Basic[WAN/LAN]
| 4. IEEE 802.11b
| 5. SNMP
| 6. Server[DHCP,NAT,RADIUS]
| 7. Server[DMZ]
| 8. MAC Filter
| 9. IP Filter
| 0. Advanced
|
| COMMAND
| L(Load)/S(Save)/R(Reboot)/D(Default)/C(Command shell)
|
+-----------------------------------------------------------------------------------------------+
| Select Configuration Menu Number / Select Command
+-----------------------------------------------------------------------------------------------+
Select >
If the password is correctly entered, a prompt provided by AP firmware appears as shown in the window
below. The default value of the password is "lw2100ap".
LW2100AP User's Manual
Version 1.4
LG LW2100AP
Copyright© 2002 LG Electronics Inc., LTD.
Page 42 of 46
2002.05.14
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|