Table of Contents
Advertisement
1.2. Hardware Installation
The configuration information of connected AP is displayed.`
1. Choose the place with the consideration of power outlet and network connection to install
LW2100AP.
2. Use a UTP Ethernet Straight-though cable to connect the DSL/Cable Modem to the
LAN1(Global) port.
3. Use a UTP Ethernet Straight-though Cable to connect the LAN2(Local) port to a free port on
your hub or switch OR Use a Cross-Over cable to connect directly to a PC.
4. Connect the Power Adapter to the DC 5V port on the LW2100AP and into a wall outlet.
LW2100AP User's Manual
Version 1.4
LW2100AP
HUB
Copyright© 2002 LG Electronics Inc., LTD.
Page 9 of 46
2002.05.14
Internet
ADSL Modem
or Cable Modem
or Uplink HUB
Advertisement
Table of Contents
