Network Setting For Pc - LG LW2100AP User Manual

1.3. Network Setting for PC

Client machines(PC) require no software, simply set them to accept a dynamically assigned IP
address and reboot. Each time they are powered up the LW2100AP will recognize them and
set their IP address to instantly connect them to the LAN.
If you want to use an assigned (static) IP address, you can select "Specify an IP address" in
"TCP/IP Properties" window.
How to Set DHCP Client (in Win98)
a. Select Control Panel(Network('TCP/IP' (TCP/IP is only for LGE card). Then the
"TCP/IP Properties" window will be brought to the screen. Click the "IP
Address" tab in the "TCP/IP Properties" window. Select "Obtain an IP address
automatically". Then reboot the system.
Go into the DOS window to check whether the IP address is normally assigned after the
system reboots. Then execute the command of winipcfg.
LW2100AP User's Manual
Version 1.4
Copyright© 2002 LG Electronics Inc., LTD.
Page 11 of 46
2002.05.14