Attaching The Magnetic Sensor - Hitachi EUP B715 Instruction Manual

4. Attaching the Magnetic Sensor

To use Real-time Virtual Sonography (RVS), attach the Magnetic sensor
to the probe. There are two types of Magnetic sensors, for EZU-RV2S
and EZU-RV3S. The Magnetic Sensor (EZU-RV2S) and the Magnetic Sensor
(EZU-RV3S) are shown in Fig.19 and Fig.20.
To attach the Magnetic sensor as shown in "4.1 Magnetic Sensor (EZU-RV2S)"
or "4.2 Magnetic Sensor (EZU-RV3S)" depend on your Magnetic sensor.
Projected part
Fig.19 Magnetic Sensor (EZU-RV2S)
Fig.20 Magnetic Sensor (EZU-RV3S)
Magnetic sensor
(black)
Direction
mark
Magnetic sensor
(White)
-18- Q1E-EP1245