Magnetic Sensor (Ezu-Rv2S); Attaching The Magnetic Sensor - Hitachi EUP B715 Instruction Manual

4.1 Magnetic Sensor (EZU-RV2S)

4.1.1

Attaching the Magnetic Sensor

To use Real-time Virtual Sonography (RVS), attach the Magnetic sensor
as shown below.
1) Insert the Spacer for EZU-RV2S in the Magnetic sensor [1] and into
the Magnetic sensor attachment with correct direction [2] as shown
in Fig.21. Place the projected part upward as shown in Fig.21.
Spacer for EZU-RV2S
[1]
Projected part of the
Magnetic sensor
(Place the projected
part upward as shown
here.)
[2]
Magnetic Sensor
(EZU-RV2S：Black)
Magnetic sensor
attachment
Fig.21 Attaching the Magnetic Sensor
-19- Q1E-EP1245