Panasonic WX-LT350 Operating Instructions Manual page 10

!3 Battery indicator [BATT]
Indicates the status of the microphone
power supply and the battery condition
as follows:
Green light: Power is turned "ON".
Orange light: Power is turned "ON", but
battery is nearing its end.
Red light: Battery is depleted.
Charge the battery or install a new
one.
Light off: Power is turned "OFF".
Blinking (green, orange or red):
Channel setting error. (☞ page 11,
12)
!4 Microphone input terminal [MIC IN]
(side)
Transmits the audio from a connected
external microphone to the receiver.
When an external microphone is con-
nected to this terminal, the audio from
the q Microphone opening is muted.
(☞ page 19)
!5 Neck strap
For hanging the microphone around the
neck. (☞ page 14, 24)
!6 Clip (rear)
For adjusting the neck strap to an appro-
priate length. The clip can be attached to
the speaker's clothes. (☞ page 14, 24)
!7 Battery cover (rear)
The battery cover can be removed by
pulling in the direction of the arrow.
!8 Battery slot (inside the battery cover)
Install one AA size nickel metal hydride
rechargeable battery or one AA/LR6 size
alkaline dry cell, paying attention to the
polarity marks (+, –) inside the battery
cover. (☞ page 13, 21)
10
!9 Channel select switch (inside the bat-
tery cover)
Selects the microphone
channels and the functions assigned to
!0 Function button. (☞ page 11, 12)
Note:
• Use the specified charger (WX-LZ150)
for charging nickel metal hydride batter-
ies. Charging takes up to 8 hours, but the
charging time varies depending on bat-
tery type and status of use.
transmitting