Connecting An External Microphone - Panasonic WX-LT350 Operating Instructions Manual

Connecting an external microphone

This function allows you to use an external microphone instead of the microphone opening of
this microphone. Connect an external microphone (for example, an electret condenser micro-
phone) to the microphone input terminal of the microphone, and transmit the audio to the
receiver.
ø3.5 mini-plug
1
Turn off the power of the microphone.
2
Using the ø3.5 mini-plug, connect the external microphone (for example, a commer-
cially available electret condenser microphone) to the microphone input terminal.
3
Turn on the power of the microphone.
Important:
• Do not connect external devices (CD players or MD players) to the microphone input termi-
nal. Loud noises may damage your hearing. When an external device is mistakenly con-
nected, turn off the power of the microphone and the external device, disconnect the plug,
and connect the device to external input terminal.
Note:
• Once the ø3.5 mini-plug is plugged into the microphone input terminal, priority is given to
this audio transmission from an external microphone and the audio from the microphone
opening will not be transmitted.
• The microphone input terminal of the microphone is a monaural terminal. If a stereo exter-
nal microphone is plugged into the microphone input terminal, either the right or the left
channel audio will be transmitted.
• When fine-tuning the volume of external microphone using this microphone, select [OWN]
by pressing the selector button. For fine tuning, refer to "Adjusting the volume" (☞ page 16,
17).
• Use a unidirectional microphone. The use of an omnidirectional microphone may cause
feedback.
• In addition to this manual, refer to the operating instructions of the external microphone to
be connected.
Electret condenser microphone
(commercially available)
WX-LT350
2
BATT CHG
PWR
1, 3
[PWR/MUTE] button
Microphone input terminal
19