Panasonic WX-LT350 Operating Instructions Manual page 27

Symptom
No reception at all
(No audio output from
the receiver, or reception
indicator does not
respond)
Volume too low
(No sound)
No sound from the
microphone opening
No sound
No sound from an exter-
nal microphone
C Operating instructions of WX-LR100, WX-LR100/A, WX-LR100/B, WX-LA20, WX-LA50,
WX-LS100 (as of June 2009)
Cause/solution
• Are all devices connected correctly?
→ Check cables and connections.
• Are any of the devices turned off?
→ Turn on the power of all devices
when operating the system.
• Is the volume of the [OWN] micro-
phone turned down?
→ With the [OWN] selection indi-
cator lit, press the [D] volume
button to increase the volume.
• Is the receiver set up correctly?
→ Check the settings.
• Is any external device connected to
the external input terminal or micro-
phone input terminal?
→ Connection of an external
device or external microphone,
even if not powered up, dis-
ables sound transmission from
the microphone opening of the
microphone.
Unplug the connected devices.
• Does the [OWN] selection indicator
blink?
→ Press the [PWR/MUTE] button
to cancel muting.
• Is the external microphone connect-
ed to the external input terminal?
→ Connect the external micro-
phone to the microphone input
terminal.
Ref. pages
C
C
9, 16, 17
C
19, 20
18
19
27