Resetting The System - Epson SF-510 User Manual

Web application
If you still cannot solve the problem, contact Epson.
See "Where to get help" on page 100.

Resetting the system

If your product is not functioning correctly, you can reset it.
Hold down all of the buttons (A/B/C or D) at the same time.
The screen resets and the product restarts. You will need to re-select the initial settings after the restart.
See "Initial Settings" on page 16.
c Important:
Measurement data is not recorded if a system reset is performed while measuring.
Note:
O Setting data and measurement data remain as they were before the reset was performed.
O The following shows the differences between a system reset and initialization. The time needs to be set again for both
operations.
System reset: The User Settings, Sys. Settings, Measure set., history, pulse, stride, and smartphone registration
information all remain as they were before the reset was performed.
Initialize: The User Settings, Sys. Settings, Measure set., history, pulse, stride, and smartphone registration
information are all Initialized.
Troubleshooting
Problem
When communicating with a
computer, an error screen is
displayed and communication
stops.
Do not move the product and the cradle during
communication. Avoid communicating data under
environments where static electricity can be easily
generated. If the same error occurs, reconnect the cradle
to start the communication again.
99
Solution