Screen Settings; Customizing The Measurement Screen - Epson SF-510 User Manual

Setting items
Alarm
Key Tones
Initialize
Software Version
*indicates the default setting.

Screen settings

There are four different measurement screens
available. Each screen shows different information
about your current activity.
Note:
For details on switching between screens, see
display" on page 31.
Customizing the measurement
screen
You can customize the Measurement screen to display
various information about your current activity.
1
Do one of the following to display the
Measurement screen:
Settings
Value
Tones
Vib. (vibration)
Tones & Vib. (vibration)*
OFF
ON*
OFF
—
—
"Screen
Explanation
Adjusts the alarm type and time (1 to 10 minutes).
You can also set this from the Measure set. menu.
Vib. (vibration) and Tones & Vib. (vibration) are only available on
the SF-710.
Turns button sounds on or off.
Resets all setting information (Comm. Settings, User Settings, Sys.
Settings and Measure set.) and pulse/stride sensor information in
the product's memory.
Measurement history data is also deleted.
Displays the firmware version.
O If want to use GPS positioning, press C on
the Time screen and wait for the GPS to
determine your location.
O If GPS positioning is not working or is
taking too long, press C on the Time screen.
Press C or D to highlight Skip on the GPS
positioning screen, then press A to
temporarily skip positioning. The product
will continue to search for a GPS signal
while measuring your activity.
See "Skipping GPS positioning" on page 19.
O If you want to measure in Indoor mode,
press C on the Time screen. Press C or D to
highlight Indoor on the GPS positioning
screen, then press A.
See "Indoor mode" on page 19.
86