Setting The Target Pace Function (Sf-710 Only); Setting The Target Pace - Epson SF-510 User Manual

6
Set the distance or time to divide the lap, then
click OK.
7
Use any of the on-screen settings to edit the
presets.
Button
Add
Insert
Edit
Delete
Move Down
Move Up
8
When you have finished adjusting the AT Lap
settings, click OK.
Note:
When the Standard box is checked, your preset
will be repeated every lap. Uncheck the Standard
box to enter custom settings for multiple laps.
Using your SF-510/710 with a computer
Description
Creates a new preset.
Inserts a new preset at
the current point.
Edits the selected
preset.
Delete the selected
preset.
Moves the selected
preset down.
Moves the selected
preset up.
74
9
Select the settings you want to update on the
product, then click Write to Wrist Device.
10
Click Yes.
11
Click Close.
See the following sections for additional information
on the AT Lap settings and measuring workouts.
See "Recording laps automatically" on page 43.
See "Measuring" on page 30.

Setting the Target Pace

Function (SF-710 only)
You can use the Target Pace function to sound an
alarm if you fall behind your preset pace.
Setting the target pace
1
Display the Model Settings for Run Connect.
See "Viewing the Model Settings screen (SF-710
only)" on page 71.