Table of Contents
Advertisement
b. The heat sink is secured by two mounting studs. Pinch the clips of the studs inward
push the studs upward
drive adapter
Figure 18. Removing the heat sink from the M.2 solid-state drive adapter
c. The M.2 solid-state drive is secured by a retention latch. Pull the handle of the retention latch
outward to release the M.2 solid-state drive. Then, gently pull the M.2 solid-state drive out of
the M.2 slot.
Figure 19. Removing the M.2 solid-state drive
• If you are installing an M.2 solid-state drive, pull outward the handle of the retention latch in the
M.2 solid-state drive adapter.
64
ThinkStation P410 User Guide
2
to release the heat sink. Then, lift the heat sink off the M.2 solid-state
3
.
1
and
Advertisement
Table of Contents
