Table of Contents
Advertisement
Install memory modules in the numerical order as shown. The numbers 1, 2, 3, and 4 indicate the installation
sequence.
Figure 23. Memory module installation–order
To install or replace a memory module, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 57.
2. Lay the computer on its side for easier access to the system board.
3. Locate the memory slots. See "Parts on the system board" on page 5.
4. Remove any parts that might prevent your access to the memory slots. Depending on your computer
model, you might need to remove the PCI Express x16 graphics card for easier access to the memory
slots. See "PCI card" on page 61.
5. Depending on whether you are installing or replacing a memory module, do one of the following:
.
Chapter 7
Installing or replacing hardware
67
Advertisement
Table of Contents
