Table of Contents
Advertisement
a. Slide the hard disk drive out of the rear of the enclosure.
Figure 35. Removing the hard disk drive from the rear
b. Flex two sides of the bracket to remove the hard disk drive from the bracket.
4. To install a new hard disk drive into the bracket, flex the bracket and align pin
1
, pin
2
, pin
3
, and
pin
4
on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
5
board
on the bottom of the hard disk drive.
Figure 36. Installing the hard disk drive into the bracket
74
ThinkStation P410 User Guide
Advertisement
Table of Contents
