System
Interfaces
Click on System in the menu bar, and then click interfaces below it.
Change the IP of the LAN, DMZ or ETH4 interface
Follow these steps to change the IP of the LAN or DMZ interface.
Step 1. Choose which interface to view or change under the Available interfaces list.
Step 2. Fill in the IP address of the LAN, DMZ or ETH4 interface. These are the
addresses that will be used to ping the firewall, remotely control it, use as a gateway for
the internal hosts or DMZ hosts.
Step 3. Choose the correct subnet mask of this interface from the dropdown menu.
Click Apply to apply the setting, or click Cancel to discard the changes.
14