Schedules; Add New Recurring Schedule - D-Link DFL-1100 User Manual

Schedules

It is possible to
configure a
schedule for
policies to take
affect. By
creating a
schedule, the
DFL-1100 is
allowing the
firewall policies
to be used at
those designated
times only. Any
activities outside
of the scheduled
time slot will not
follow the
policies and will
therefore likely
not be permitted
to pass through
the firewall. The
DFL-1100 can be
configured to
have a start time
and stop time, as
well as creating 2
different time periods in a day. For example, an organization may only want the
firewall to allow the internal network users to access the Internet during work hours.
Therefore, one may create a schedule to allow the firewall to allow traffic Monday-
Friday, 8AM-5PM only. During the non-work hours, the firewall will not allow Internet
access.

Add new recurring schedule

Follow these steps to add a new recurring schedule.
Step 1. Go to Firewall>Schedules and choose Add new.
Step 2. Enable the checkbox named Recurring scheduling.
Step 3. Use the checkboxes to set the times this schedule should be active.
Click Apply to apply the change, or click Cancel to discard the changes.