Wan Interface Settings - Using Pptp - D-Link DFL-1100 User Manual

WAN Interface Settings – Using PPTP
PPTP over Ethernet connections are used in some DSL and cable modem networks.
You will need your account details, and you may also need the IP configuration parameters of
the actual physical interface of the PPTP tunnel. Your ISP will supply you with this information.
Username – The login or username supplied to you by your ISP.
Password – The password supplied to you by your ISP.
PPTP Server IP – The IP address of the PPTP server that connects to the
N D
ET
Before PPTP can be used to connect to your ISP, the physical (WAN) interface parameters
need to be supplied. It's possible to use either DHCP or Static IP depending on the type of
ISP used. This information will be supplied by your ISP.
If you are using static IP, please enter the following information.
IP Address – The IP address of the WAN interface. This IP is used to connect to
the PPTP server.
Subnet Mask – Size of the external network.
Gateway IP – Specifies the IP address of the default gateway used to access the
Internet.
DFL-1100.
EFEND