Ipsec Vpn Between Two Networks; Creating A Lan-To-Lan Vpn Tunnel - D-Link DFL-1100 User Manual

Network security firewall
Hide thumbs Also See for DFL-1100:
Table of Contents

Advertisement

IPSec VPN between two
networks
In the following example users on the main
office internal network can connect to the
branch office internal network or vice versa.
Communication between the two networks
takes place in an encrypted VPN tunnel that
connects the two DFL-1100 Network Security
Firewalls across the Internet. Users on the
internal networks are not aware that when
they connect to a computer on the other
network that the connection runs across the
Internet.
As shown in the example, you can use the
DFL-1100 to protect a branch office and a
small main office. Both of these DFL-1100s
can be configured as IPSec VPN gateways to
create the VPN that connects the branch
office network to the main office network.
The example shows a VPN between two
internal networks, but you can also create
VPNs between an internal network behind one
VPN gateway and a DMZ network behind another, or between two DMZ networks. The
networks at the ends of the VPN tunnel are selected when you configure the VPN policy.

Creating a LAN-to-LAN VPN Tunnel

Follow these steps to add a LAN-to-LAN Tunnel.
Step 1. Go to Firewall>VPN and choose Add new.
Step 2. Enter a Name for the new tunnel in the name field. The name can contain
numbers (0-9) and upper and lower case letters (A-Z, a-z), and the special characters -
and _. No other special characters and spaces are allowed.
Step 3. Specify your local network, or your side of the tunnel, for example
192.168.1.0/255.255.255.0, in the Local Net field.
Step 4. Choose the authentication type, either PSK (Pre-shared Key) or Certificate-based.
If you choose PSK make sure both firewalls use exactly the same PSK.
Step 5. As Tunnel Type choose LAN-to-LAN tunnel and specify the network behind the
other DFL-1100 as Remote Net, also specify the external IP of the other DFL-1100; this
can be an IP or a DNS name.
Click the Apply button below to apply the change or click Cancel to discard changes.
Repeat this on the firewall on the other site.
DFL-1100
DFL-1100

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netdefend dfl-1100

Table of Contents