Add A New Static Route; Remove A Static Route - D-Link DFL-1100 User Manual

Add a new Static Route

Follow these steps to add a new route.
Step 1. Go to System and Routing.
Step 2. Click on Add new in the bottom of the routing table.
Step 3. Choose the interface that the route should be sent through from the dropdown
menu.
Step 4. Specify the network and subnet mask.
Step 5. If this network is behind a remote gateway, select Network is behind remote
gateway and specify the IP of that gateway.
Click Apply to apply the setting, or click Cancel to discard the changes.

Remove a Static Route

Follow these steps to remove a route.
Step 1. Go to System and Routing.
Step 2. Click Edit at the route you would like to remove.
Step 3. Select Delete this route.
Click Apply to apply the setting, or click Cancel to discard the changes.
22