Phone Call Displays And Alerts; Display Color Change On Channel - Motorola APX 7000 User Manual

You Hear Tone Name
Unique Enhanced Zone Bank
High-Low Down
Tone

Phone Call Displays and Alerts

The following phone call displays and alerts appears on the radio display when you make and receive
Phone calls. The radio also uses alert tones to indicate the current status.
You Hear You See
A Long No phone
Tone
Phone
busy
A Busy Phone
Tone busy
– No ac-
knowledge
A High- –
Pitched
Tone
NOTICE: You have the option of sending additional digits (overdial), such as an extension
number, credit card, or PIN numbers to the phone system. If the radio is preprogrammed for live
overdial, every digit entered after the call is connected, is sent to the phone system.
If the radio is preprogrammed for buffered overdial, the digits pressed are entered into memory
and then sent when the PTT button is pressed. Press the PTT button to send either digits or
voice, but not both at the same time.

Display Color Change On Channel

This feature provides visual channel identification where users are able to have a quick visual
recognition of being on a particular channel.
Your radio must be preprogrammed to allow you to use this feature.
When changing channels, the radio backlight on top display, radio keypad and accessories (DRSM)
changes to the preprogrammed color.
The backlight on top display and keypad changes to white. If connected to DRSM, the DRSM backlight
changes to white for the following scenarios:
• When changing to or powering up on an invalid channels such as unprogrammed channels,
receiver frequency error channel and blank channels
• The radio is in radio stun or radio lock mode
For hard key zeroize, key loading, and scan list programming, the backlight follows the home channel
backlight color.
Heard
When EZB Down button is pressed to scroll the En-
hance Zone Bank down.
When
You press the PTT
button and the phone
system is not availa-
ble.
The phone system is
busy.
When a channel is not
available.
The call is not ac-
knowledged.
When you release the
PTT button.
Notes
Press to hang up. The radio re-
turns to the Home screen.
Press to exit the phone mode and
try your call later.
The radio automatically connects
when a channel opens.
Press to hang up. The radio re-
turns to the Home screen.
The radio indicates to the landline par-
ty that the caller may begin talking.
6875945M01-NL
Status Indicators
51