Mode Select Feature; Saving A Zone And A Channel To A Softkey; Saving A Zone And A Channel To A Button - Motorola APX 7000 User Manual

• The display shows Searching. Once found, the display shows the matched channel name and the
radio changes its transmission to the selected channel.
• If the radio is triggered to search for an empty entry, the display shows Invalid entry. Repeat
step 2 to search again.
• If the entry does not match, the display shows Channel name not found.Repeat
search again; or press
1.4

Mode Select Feature

Mode Select allows a long press to save the current zone and channel of your radio to a programmable
button, keypad button, or a softkey; then once programmed, the short-press of that button or softkey
changes the transmission to the saved zone and channel.
There are two methods to save the selected zone and channel:
• Softkeys
• Programmable buttons and keypad buttons (digit 0 to 9)
NOTICE: Your radio must be preprogrammed for you to use this feature.
1.4.1

Saving a Zone and a Channel to a Softkey

When and where to use: Five softkeys are available for you to save the frequently used zone and
channel.
Procedure:
1 Toggle from your current zone and channel to the required zone and channel.
2 or to MS1, MS2 ... or MS5.
3 Press and hold the Menu Select button directly below one of the softkey (MS1–MS5).
You hear a short, medium-pitched tone when the zone and channel is saved.
NOTICE: To change the programmed zone and channel, repeat this procedure.
Short press of the programmed softkey changes your current transmission to the zone and
channel programmed in this softkey.
1.4.2

Saving a Zone and a Channel to a Button

When and where to use: You can save the frequently used zone and channel to the programmable
buttons and keypad digit 0 to 9 buttons.
Procedure:
1 Toggle from your current zone and channel to the required zone and channel.
2 Press and hold the button you desire to program.
You hear a short, medium-pitched tone when the zone and channel is saved.
NOTICE: Repeat this procedure to change the zone and channel of the programmed button.
Short press of the programmed button changes your current transmission to the zone and
channel programmed in this button.
or the Menu Select button directly below Exit to exit.
6875945M01-NL
General Radio Operation
step 2 to
55