Zone-To-Zone Cloning; Cloning Zones - Motorola APX 7000 User Manual

6875945M01-NL
Advanced Features
2.2.7

Zone-to-zone Cloning

Zone Cloning clones conventional zones from one radio to another.
This feature allows you to select the followings zones from a source radio and clone them into a target
radio.
• Clone enabled zones
• Dynamic Zones
• Multiple Private Line (MPL)
You can clone the zones by connecting the source radio and target radio with a clone cable. The target
radio must be digital, band, and FCC mandate compatible with the source radio.
NOTICE: This feature is applicable for Full Keypad models and Limited Keypad models.
2.2.7.1

Cloning Zones

Procedure:
1 On the source radio, press the Menu Select button directly below Clon.
2 Press the Menu Select button directly below Sel to select source zone.
3 When connecting to the target radio, one of the following scenarios occurs:
• If the radio is compatible, the radio displays Target radio connected. Proceed to
4.
• If the radio is not compatible, the radio displays Target radio incompatible. Press the
Menu Select button directly below Ok and the radio returns to the previous screen.
Once connected, the zone clone status is displayed on the right.
4 Press the Menu Select button directly below Next to accept the source zones selection. One of
the following scenarios occurs:
• If you select a single source zone, press the Menu Select button directly below Sel to select
the target zones for cloning.
• If you select multi-source zones, the radio displays Confirm target and shows the
automatically selected target zones and source zones mapping.
• If the selected multi-source zones exceed the last clonable target zone, the radio displays
<#> src zones unselected and Sel exceed max tgt zone alternatively.
5 Press the Menu Select button directly below Clon to begin cloning.
The radio displays Enter password if the protected target zone is selected.
6 Enter the password and press the Menu Select button directly below Ok to start cloning.
The radio displays Cloning...<Current cloning zone>. One of the following scenarios occurs:
• If the cloning is successful, a tone sounds, the radio displays Clone successful and the source
zone alias is displayed on the right.
• If the cloning is not successful, a tone sounds and the radio displays Clone failed. Press the
Back button to enter the source zone list.
• If you press the Home button, the radio aborts cloning.
70
step