6875945M01-NL
Advanced Features
2.2.6
Dynamic Zone Programming (DZP)
NOTICE: Your radio must be preprogrammed to allow you to use this feature. This feature
works on the condition at least one zone in the radio must be a non-dynamic zone.
This feature provides one or more Dynamic Zones to store frequently used channels be it conventional
or trunking. These dynamic channels are saved from pre-existing (non-dynamic) channels in the radio.
This saves the time and effort from the regular navigation around the working zones and channels.
User can also delete or update the list in the Dynamic Zone.
2.2.6.1
Entering the Dynamic Zone to Select a Dynamic Channel
Procedure:
1
or to Zone then press the Menu Select button directly below Zone.
The display shows the Zone screen.
2
or
to <# Dynamic Zone Channels>.
3 Perform one of the following actions.
•
Press the Menu Select button below Sel to select.
•
Press the Menu Select button below Exit to exit.
If you have selected one of the Dynamic Zone Channels list, the display returns to Home screen
with the selected <# Dynamic Zone Channels> shown on the screen.
If you have selected Exit without selecting any Dynamic Zone Channels list, the display returns
to Home screen without any changes.
2.2.6.2
Saving a Channel in the Dynamic Zone from List Selection
Prerequisites: The radio must be in Dynamic Zone in order to perform this operation.
Procedure:
1
or to ZnPr. Press the Menu Select button directly below ZnPr to enter Program Zone
screen.
2 Press the Menu Select button directly below Edit.
The display shows Search Options screen.
3
or
to List Selection. Press the Menu Select button directly below Sel .
The display shows Select Zone screen.
4
or
to the required zone. Press the Menu Select button directly below Sel .
The display shows Select Chan screen.
3
# indicates number of the channel on the 16-Position Switch which are numbered from 1 to 16.
68
3