Brake Maintenance
Adjusting the Parking
Brake
Service Interval: Every 200 hours—Check the
parking-brake adjustment.
1.
Loosen the set screw securing the knob to the
parking-brake lever
Figure 59
1. Knob
2. Set screw
2.
Torque the knob to 41 to 68 N∙m (30 to 40 in-lb)
to actuate the lever.
3.
Tighten the set screw.
(Figure
59).
3. Parking-brake lever
Belt Maintenance
Servicing the Engine Belts
Service Interval: After the first 10 hours—Check the
Every 100 hours—Check the condition and
tension of all belts.
Checking the Alternator-Belt
Tension
1.
Open the hood.
2.
Apply 30 N (22 in-lb) of force to the alternator
belt, midway between the pulleys
g031637
1. Alternator belt
3.
If the belt does not deflect 11 mm (7/16 inch),
complete the following procedure to tension the
belt:
A.
Loosen the bolt securing the brace to the
engine and the bolt securing the alternator
to the brace.
B.
Insert a pry bar between the alternator and
engine, and pry out at the alternator.
C.
When you obtain the proper tension, tighten
the alternator and brace bolts to secure the
adjustment.
49
condition and tension of all belts.
(Figure
Figure 60
60).
g031638