ABB FlexPendant Product Manual page 25

7
Connecting the retractable cable, IRC5P
Use this procedure to connect the FlexPendant to the retractable cable.
Disconnect the original cable
1
2
3
Product manual - FlexPendant Retractable Cable
3HAC048816-001 Revision: B
Action
CAUTION
Verify that the emergency stop button and
the three-position enabling device are work-
ing.
Action
Remove the screws on the back cover of the
FlexPendant using a torx screw driver.
Pull the front cover out of the back cover and
remove the connector between them.
Remove the cable nut of the back cover.
© Copyright 2015-2016 ABB. All rights reserved.
2 Installation
2.3 Connecting the cables
Note
This step is mandatory.
Note
xx1600000631
xx1600000632
xx1600000633
Continues on next page
Continued
25