Table of Contents
Advertisement
3.3 Cleaning the complete FlexPendant Retractable Cable
Required equipment
Equipment, etc.
Vacuum cleaner
Cleaning agent, exterior cleaning
Cleaning
Use the following procedure to clean the complete FlexPendant Retractable Cable.
The cable must be stopped at the end of the rewinding or completely out to
perform the cleaning.
1
2
3
Do's and don'ts!
The section below specifies some special considerations when cleaning the
FlexPendant Retractable Cable.
Always!
Never!
Product manual - FlexPendant Retractable Cable
3HAC048816-001 Revision: B
3.3 Cleaning the complete FlexPendant Retractable Cable
Note
Action
Clean the interior of the FlexPendant Retractable
Cable with a vacuum cleaner if necessary.
Clean the exterior of the FlexPendant Retractable
Cable using a soft cloth and water or a mild
cleaning agent.
Clean the brushes with a vacuum cleaner.
•
Always use ESD protection
•
Always use cleaning equipment as specified above! Any other cleaning
equipment may shorten the life of paintwork, rust inhibitors, signs, or labels!
•
Never remove any covers or other protective devices when cleaning the
outside of the FlexPendant Retractable Cable.
•
Never use water or liquid inside the FlexPendant Retractable Cable.
© Copyright 2015-2016 ABB. All rights reserved.
Note
ESD protected
If necessary, use rag with e.g. alcohol or a paint
approved cleaner for the paint version
Note
xx1400000781
3 Maintenance
35
Hide quick links:
Advertisement
Table of Contents
