Adjustments; Handle Height Adjustment - Toro Greensmaster Flex 21 Service Manual

Adjustments

Handle Height Adjustment

1. Make sure mower is parked on a level surface with
the engine OFF.
2. Remove hairpin cotters from the ring pins on each
side of the mower handle.
3. Support handle and remove ring pins from each side
1
of the mower handle. Raise or lower handle to the de-
2
sired operating position.
4. Align holes. Reinstall ring pins and hairpin cotters.
Figure 1
1. Ring pin 2. Hairpin cotter
Greensmaster Flex 21 Chassis and Controls
Page 6 – 3