Advertisement
Only carry out stages
5~8 if you cannot
obtain clear video
playback as described
in stages 1~4.
Select a TV channel
number on which you
wish to watch video's.
Make sure that your VCR
is in standby by pressing
POWER on the remote
control.
(Only the clock will be
displayed.)
Press PROG.
D
or
E
on
the front of your VCR for
more than 4 seconds.
CH22 will appear in the
VCR display.
The following picture will
be displayd on the TV
screen.
RF CHANNEL : 22
PR
i
Press PROG.
D
or
E
on
the VCR to select
another video channel.
You may select any
channel number between
22 and 68.
Select a TV channel
number on which you
wish to watch video's.
Tune this channel so that
a bright blue screen
appears.
Store this channel on
your TV.
Press POWER on the
front of your VCR when
you have finished.
D
OK i
9
Make sure that you
have correctly
installed your VCR
and successfully
tuned in a dedicated
video channel on your
TV. If you do not tune in
a dedicated video
channel on your TV you
will be unable to view
and record video tapes!
Advertisement
