Front Gearcase Removal / Installation - Polaris RZR PRO XP 2020 Service Manual

FRONT GEARCASE REMOVAL /
INSTALLATION
REMOVAL
1. Remove both front wheels.
2. Remove Front Drive Shafts. See Front Drive Shaft
Removal page 8.11.
3. Remove left and right tie rod end nuts. Remove tie
rod end joints with a proper pulling tool.
q
4. Remove four fasteners
bumper cover.
w
5. Remove four fasteners
fascia.
9930583 R02 - 2020 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
and remove the front
and remove the front
6. Remove two plastic clips that retain bumper to
valence and four fasteners
7. Remove front four bolts from sub frame
8. Remove four control arm bolts
arms from sub frame bracket.
FINAL DRIVE
e
.
r
.
t
and remove control
8.35
8