Sharp FACSIMILE User Manual page 132

Polling (Requesting a Fax Transmission)
2
Press Rapid Key 15/POLL.
•
If you used the handset, replace it
when POLLING appears in the
display. Reception will begin.
15/POLL
34
Being polled (polling
standby)
To let another fax machine poll your
fax, press the RECEPTION MODE
key to set the reception mode to FAX
and load the document(s), and press
Rapid key 15/POLL. "P" will appear in
the display.
Transmission will take place when the
other fax machine calls your machine
and activates polling. Automatic
reception is possible while your fax is
on polling standby.
130
Polling security
Polling Security allows you to prevent
unauthorized polling of your machine.
When this function is turned on,
polling will only take place when the
fax number of the polling fax machine
has been entered in your machine's
list of permitted fax numbers (called
"passcode numbers"). The number of
the polling fax must also be correctly
programmed into itself for
identification.
To use Polling Security, follow the
steps below to turn the function on,
and then enter permitted numbers as
shown on the following page.
1
Press these keys:
FUNCTION
SECURITY SELECT
2
Press 1 to turn polling security on,
or 2 to turn it off.
YES
1
3
Press the START key and then the
STOP key.
START
3
Press
3 times
NO
or 2
STOP