Sharp FACSIMILE User Manual page 51

Loading the Imaging Film
1. Press the release marked OPEN and
open the print compartment cover.
•
Caution!
The printing head (the strip of metal on
the underside of the cover) applies heat
to the printing film. It may be hot if a
document has just been printed.
If you are replacing the imaging film,
2.
take the old film out of the printing
compartment and remove the three (3)
green gears and the green flange from
the ends of the spools
DO NOT DISCARD THE GREEN GEARS
AND THE GREEN FLANGE!
.
Quick Reference Guide
Take the new film out of its package,
3.
and insert two of the gears provided
with the fax into the ends of the spool
with film. Make sure that the two tabs
on the gears fit properly into the slots in
the ends of the spool.
2 tabs
•
Do not yet remove the band which
holds the spools together.
Hold the empty spool so that the end
4.
with only one slot is on the left, and
lower the spools into the front of the
printing compartment. The gears in the
ends of the spool with film should fit
into the slots on each side of the
printing compartment.
49