Setting The Reception Mode - Sharp FACSIMILE User Manual

Setting the Reception Mode

Your fax has four modes for receiving incoming calls and faxes:
TEL mode:
This is the most convenient mode for
receiving phone calls. You can also
receive faxes; however, all calls must
first be answered by picking up the
fax's handset or an extension phone
connected to the same line.
FAX mode:
Select this mode when you only want
to receive faxes on your line. The fax
machine will automatically answer all
calls on two rings and receive
incoming faxes.
TEL/FAX mode:
This mode is convenient for receiving
both faxes and voice calls. When a
call comes in, the fax will detect
whether it is a voice call (including
manually dialled fax transmissions),
or an automatically dialled fax. If it is a
voice call, the fax will make a special
ringing sound to alert you to answer.
If it is an automatically dialled fax
transmission, reception will begin
automatically.
A.M. mode:
Use this mode only if you have
connected an answering machine to
the fax (see Chapter 6). Select this
mode when you go out to receive
voice messages in your answering
machine and faxes on your fax
machine.
Setting the Reception Mode
Setting the reception mode
Press the RECEPTION MODE key
until the arrow in the display points to
the desired mode.
RECEPTION MODE key
1 2 3
4 5 6
7 8 9
0
05 - NOV 10:30
RECEPTION
MODE
05 - NOV 10:30
05 - NOV 10:30
05 - NOV 10:30
For more information on receiving
faxes in TEL FAX and TEL/FAX
modes, see Chapter 3, Receiving
Documents (page 95). For more
information on using A.M. mode, see
Chapter 6, Answering Machine
Hookup (page 110).
TEL FAX
TEL/FAX A.M.
TEL FAX
TEL/FAX A.M.
TEL FAX
TEL/FAX A.M.
TEL FAX
TEL/FAX A.M.
75