Sharp FACSIMILE User Manual page 137

6
Press the * key or the # key until
the desired operation appears in
the display.
Transmission (SEND MODE)
Polling
Broadcasting
or
7
Press the START key and go to the
specific procedure for your
operation (see the following
pages).
START
Transmission
(Continued from Initial procedure.)
8
Press "1" if you want the document
to be scanned into memory and
then transmitted, or "2" if you want
the document to be transmitted
directly from the feeder. (Note: If
you select "2", you can include a
timer setting in the program.)
•
If you pressed "1", go to Step 11. If
you pressed "2" and don't want to
make a timer setting, go to Step 10.
1 or 2
Entering and Using Programs
9
Enter the time at which you want
the operation to take place (2 digits
for the hour and 2 digits for the
minute).
0
9
10
If you want the document to be sent
through memory, press the START
key.
START
11
Enter the Speed Dial number of the
receiving fax machine.
2
12
Press the START key.
START
13
If desired, set the resolution and/or
contrast by pressing the
RESOLUTION key (otherwise, skip
this step).
RESOLUTION
14
Press the START key and then the
STOP key.
START
2
5
Example: 9:25
5
(Example)
STOP
135