Sharp FACSIMILE User Manual page 58

Quick Reference Guide
SELECT AUTO RECEIVE
Press 1 to have your fax automatically
answer a call after 5 rings in A.M. mode if
an answering machine connected to the fax
fails to answer before that time. Press 2 to
turn off the function.
LANGUAGE SELECT
Use this to change the language used in the
display, reports and lists. Press the START
key, press * or # until the desired language
appears in the display, and then press the
START key again.
PBX CONNECTION
Use this setting if your fax is connected to a
PBX. Press 1 to select YES, and then select
the mode for connection to an outside line
(1 for ID, or 2 for FLASH). If you selected ID,
enter your PBX ID number and then press
the START key.
FAX SIGNAL RECEIVE
Press 1 to have your fax automatically begin
reception if you hear a soft fax tone after
answering a call. Press 2 to turn the
function off (turn the function off if you use a
computer fax modem on the same line).
JUNK NUMBER CHECK
Press 1 to block reception from fax numbers
entered in the Anti Junk Number List. Press
2 to allow reception from all numbers.
POLLING
Press 1 to use Rapid Key 15/POLL as a
polling key. Press 2 to use it as a regular
Rapid Key.
CALLER ID
If you subscribe to a Caller ID service and
want to use the Caller ID function, Press 1.
To turn Caller ID off, press 2. (Note: This
setting is not available in some countries.)
56
AUTO COVER SHEET
Press 1 to have the fax automatically
generate a cover sheet and send it as the
last page of each transmission. Press 2 to
turn the function off.
AUTO PRINT OUT
Press 1 to have your fax automatically print
out an Activity Report once every 30
operations. (The list can still be printed out
on demand when desired.) Press 2 to turn
off automatic print out.
ECM MODE
Press 1 to have the fax machine correct any
distortions in a fax transmission or reception
before printing the fax at the receiving end
(note that the other fax machine must also
have ECM mode). Press 2 to turn off the
function.