Operation; Starting Operation - Hitachi EP-A9000 Instruction Manual

Operation

Starting Operation

1
Securely insert the power plug to the outlet
2
Press the
Operation will start, and indicator
will light up.
Pressing the
while the unit is operating will
dim the indicator and stop the
operation of the unit.
 "Air Purify" mode is set as a factory default.
 From the second use onward, the memory function enables operation based on the saved status.
Standby Power Consumption
 As long as the power plug is inserted in the outlet, the unit consumes approximately 3W of power, even if the unit
is not in use.
(Unplug from the outlet if the unit will not be used for an extended period of time.)
E-18
power button
power button
Power button
After all indicators have light up at once,
"Air Purify" and "Auto" will light up.
For the first 3 minutes, the unit will
check and store the condition of the
room air.
During that time, the "Air Sensor" will
flash a green light.
Blinking
Skin Moist
Humidify Max Odor Absence
Air Purify Auto Pollen Rapid
Air
Mode Option
flow
On
Off
PM2.5
Sensor
(P.E-26)