Table of Contents
Advertisement
How to Use - Heat Level Adjustment
1
Touch the main power switch. After the appliance is powered
on, the buzzer beeps once, all displays show "–" or "– –",
indicating that the appliance has entered the standby mode.
2
Place a suitable cookware on the cooking zone that you wish
to use.
* Make sure that the bottom of the pot and the surface of the
cooking zone are clean and dry.
3
Touch the power regulating key "-" or " + " of the
Front/Rear cooking zone to set power.
• If you don't choose a power setting within
1 minute, the appliance will automatically switch
off. You will need to start over from step 1.
• You can change the power setting at any time
during cooking.
* To stop heating, please touch "-" until the
display shows "0".
4
Touch the main power switch to turn off the appliance.
EN13
Advertisement
Table of Contents
